Fixing Rail and Cantilever Arms from Armafix

RapidRail® is an innovative fixing system designed for a speedy installation.  It has continuous perforation and the distance between the rail end and the first hole is always equal.  The unique perforation on WM15, WM30 and WM35 rail allows for hanging pipework from both sides.  The continuous graduated centimetre scale on one side helps to speedy up installation even more as it enables quick alignment of the pipe fixings.  Call us with your pipe installation details and we will recommend the right rail for you.

________________________________________________________________________________________________

WM1 RapidRail® Fixing Rail

rapidrail_armafix_wm1WM1 RapidRail® is a 30 x 15mm rail which is available in either 2m or 6m lengths.  The pre-galvanised steel thickness is 2mm.  WM1 RapidRail® can support up to 1.7kN on a uniformly distributed load. ________________________________________________________________________________________________

WM15 RapidRail® Fixing Rail

rapidrail_armafix_wm15WM15 RapidRail® is a 30 x 20mm rail which is available in either 2m or 6m lengths.  The pre-galvanised steel thickness is 1.75mm.  WM15 RapidRail® can support up to 2.4kN on a uniformly distributed load. ________________________________________________________________________________________________

WM2 RapidRail® Fixing Rail

rapidrail_armafix_wm2WM2 RapidRail® is a 30 x 30mm rail which is available in either 2m or 6m lengths.  The pre-galvanised steel thickness is 2mm.  WM2 RapidRail® can support up to 6.4kN on a uniformly distributed load. ________________________________________________________________________________________________

WM30 RapidRail® Fixing Rail

rapidrail_armafix_wm30WM30 RapidRail® is a 30 x 45mm rail which is available in either 2m or 6m lengths.  The pre-galvanised steel thickness is 2mm.  WM30 RapidRail® can support up to 10.3kN on a uniformly distributed load. ________________________________________________________________________________________________

WM35 RapidRail® Fixing Rail

rapidrail_armafix_wm35WM35 RapidRail® is a 38 x 40mm rail which is available in either 2m or 6m lengths.  The pre-galvanised steel thickness is 2mm.  WM35 RapidRail® can support up to 9.6kN on a uniformly distributed load. ________________________________________________________________________________________________

RapidRail® Cantilever Arms

rapidrail_armafix_cantilever_armsRapidRail® cantilever arms are available to suit all of the above fixing rails.  They consist of a wall plate with a CO2 welded C-profile arm and are perfectly suited for fixing to either a wall or ceiling.  The slots in the wall plate are at 90° to each other to simplify fixing.  Again the unique perforation on the WM15 and WM30 rail allows for hanging on both sides.  RapidRail® cantilever arms come in 150mm, 200mm, 250mm, 300mm, 400mm, 450mm and 500mm. ________________________________________________________________________________________________

RapidRail® Wall Plates

rapidrail_armafix_wall_platesRapidRail® wall plates are available in one size and are suited for WM1, 15, 2, 30 and 35 rail.  They consist of a wall plate with a CO2 welded U-profile and are designed for fixing rail to a wall or ceiling.  The rail can be fixed with the slot downwards or sideways and the wall plate comes with pre-assembled sliding nuts for a quick fixing. ________________________________________________________________________________________________

Rail End Caps

rapidrail_armafix_end_capsRail end caps are for a clean finish of rail end and covers all burrs.  Rail end caps are available to suit all of the above rail sizes. ________________________________________________________________________________________________

For more details on our RapidRail® system, please call our friendly team on 0113 256 7211.  We would be happy to come to your offices or site to discuss your requirements in more detail.

Comments are closed.