Stainless Steel Cable Trunking & Accessories from Armafix

Armafix supply a complete range of single and multi-compartment returned edge surface cable trunking and accessories in stainless steel finish.

The trunking is supplied in 3 metre lengths and comes complete with lid, a coupler and all the necessary fixings.  A full range of fabricated accessories with integrated couplers and screws are available to complete the system.

The trunking is supplied with a removable protective plastic coating which prevents the material from surface damage during manufacture and distribution.  All accessories are polished after they are manufactured which eliminates welding marks and other surfacing marking caused by the fabrication process.  Also, to protect accessories from damage during transit, each accessory is packed individually. ________________________________________________________________________________________________

Specification

British Standard: No standard exists for stainless steel trunking, however, in terms of size and construction the range complies with the general surface cable trunking specifications BS 4678: Part 1: 1978

Material Gauge: Unless otherwise stated all products shown are manufactured from 1.2mm material.

Material Type: Conduit Boxes rated at IP66. Ingress protection ratings are maintained only when all entries are adequately sealed.

Material Finish: 2A Bright Annealed (Mirror Finish). Mechanically polished finish 3B Dull buffed (Satin)

________________________________________________________________________________________________

 Trunking

Size

50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150

1 Comp

SGT22 SGT32 SGT33 SGT42 SGT43 SGT44 SGT62 SGT63 SGT64

SGT66

2 Comp

SGT22/2 SGT32/2 SGT33/2 SGT42/2 SGT43/2 SGT44/2 SGT62/2 SGT63/2 SGT64/2

SGT66/2

3 Comp SGT22/3 SGT32/3 SGT33/3 SGT42/3 SGT43/3 SGT44/3 SGT62/3 SGT63/3 SGT64/3

SGT66/3

_______________________________________________________________________________________________

 Gusset Bend Top Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SGBT22 SGBT32 SGBT33 SGBT42 SGBT43 SGBT44 SGBT62 SGBT63 SGBT64 SGBT66
2 Comp SGBT22/2 SGBT32/2 SGBT33/2 SGBT42/2 SGBT43/2 SGBT44/2 SGBT62/2 SGBT63/2 SGBT64/2 SGBT66/2
3 Comp SGBT22/3 SGBT32/3 SGBT33/3 SGBT42/3 SGBT43/3 SGBT44/3 SGBT62/3 SGBT63/3 SGBT64/3 SGBT66/3

_______________________________________________________________________________________________

 Gusset Bend Inside Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SGBI22 SGBI32 SGBI33 SGBI42 SGBI43 SGBI44 SGBI62 SGBI63 SGBI64 SGBI66
2 Comp SGBI22/2 SGBI32/2 SGBI33/2 SGBI42/2 SGBI43/2 SGBI44/2 SGBI62/2 SGBI63/2 SGBI64/2 SGBI66/2
3 Comp SGBI22/3 SGBI32/3 SGBI33/3 SGBI42/3 SGBI43/3 SGBI44/3 SGBI62/3 SGBI63/3 SGBI64/3 SGBI66/3

_______________________________________________________________________________________________

 Gusset Bend Outside Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SGBO22 SGBO32 SGBO33 SGBO42 SGBO43 SGBO44 SGBO62 SGBO63 SGBO64 SGBO66
2 Comp SGBO22/2 SGBO32/2 SGBO33/2 SGBO42/2 SGBO43/2 SGBO44/2 SGBO62/2 SGBO63/2 SGBO64/2 SGBO66/2
3 Comp SGBO22/3 SGBO32/3 SGBO33/3 SGBO42/3 SGBO43/3 SGBO44/3 SGBO62/3 SGBO63/3 SGBO64/3 SGBO66/3

_______________________________________________________________________________________________

 Sharp Bend Top Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SSBT22 SSBT32 SSBT33 SSBT42 SSBT43 SSBT44 SSBT62 SSBT63 SSBT64 SSBT66
2 Comp SSBT22/2 SSBT32/2 SSBT33/2 SSBT42/2 SSBT43/2 SSBT44/2 SSBT62/2 SSBT63/2 SSBT64/2 SSBT66/2
3 Comp SSBT22/3 SSBT32/3 SSBT33/3 SSBT42/3 SSBT43/3 SSBT44/3 SSBT62/3 SSBT63/3 SSBT64/3 SSBT66/3

_______________________________________________________________________________________________

 Sharp Bend Inside Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SSBI22 SSBI32 SSBI33 SSBI42 SSBI43 SSBI44 SSBI62 SSBI63 SSBI64 SSBI66
2 Comp SSBI22/2 SSBI32/2 SSBI33/2 SSBI42/2 SSBI43/2 SSBI44/2 SSBI62/2 SSBI63/2 SSBI64/2 SSBI66/2
3 Comp SSBI22/3 SSBI32/3 SSBI33/3 SSBI42/3 SSBI43/3 SSBI44/3 SSBI62/3 SSBI63/3 SSBI64/3 SSBI66/3

_______________________________________________________________________________________________

 Sharp Bend Outside Lid

 

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SSBO22 SSBO32 SSBO33 SSBO42 SSBO43 SSBO44 SSBO62 SSBO63 SSBO64 SSBO66
2 Comp SSBO22/2 SSBO32/2 SSBO33/2 SSBO42/2 SSBO43/2 SSBO44/2 SSBO62/2 SSBO63/2 SSBO64/2 SSBO66/2
3 Comp SSBO22/3 SSBO32/3 SSBO33/3 SSBO42/3 SSBO43/3 SSBO44/3 SSBO62/3 SSBO63/3 SSBO64/3 SSBO66/3

_______________________________________________________________________________________________

 45° Bend Top Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SFBT22 SFBT32 SFBT33 SFBT42 SFBT43 SFBT44 SFBT62 SFBT63 SFBT64 SFBT66
2 Comp SFBT22/2 SFBT32/2 SFBT33/2 SFBT42/2 SFBT43/2 SFBT44/2 SFBT62/2 SFBT63/2 SFBT64/2 SFBT66/2
3 Comp SFBT22/3 SFBT32/3 SFBT33/3 SFBT42/3 SFBT43/3 SFBT44/3 SFBT62/3 SFBT63/3 SFBT64/3 SFBT66/3

_______________________________________________________________________________________________

 45° Bend Inside Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SFBI22 SFBI32 SFBI33 SFBI42 SFBI43 SFBI44 SFBI62 SFBI63 SFBI64 SFBI66
2 Comp SFBI22/2 SFBI32/2 SFBI33/2 SFBI42/2 SFBI43/2 SFBI44/2 SFBI62/2 SFBI63/2 SFBI64/2 SFBI66/2
3 Comp SFBI22/3 SFBI32/3 SFBI33/3 SFBI42/3 SFBI43/3 SFBI44/3 SFBI62/3 SFBI63/3 SFBI64/3 SFBI66/3

_______________________________________________________________________________________________

 45° Bend Outside Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SFBO22 SFBO32 SFBO33 SFBO42 SFBO43 SFBO44 SFBO62 SFBO63 SFBO64 SFBO66
2 Comp SFBO22/2 SFBO32/2 SFBO33/2 SFBO42/2 SFBO43/2 SFBO44/2 SFBO62/2 SFBO63/2 SFBO64/2 SFBO66/2
3 Comp SFBO22/3 SFBO32/3 SFBO33/3 SFBO42/3 SFBO43/3 SFBO44/3 SFBO62/3 SFBO63/3 SFBO64/3 SFBO66/3

_______________________________________________________________________________________________

Gusset Tee Top Lid

Note: A flyover is included in a compartment

 

 

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SGTT22 SGTT32 SGTT33 SGTT42 SGTT43 SGTT44 SGTT62 SGTT63 SGTT64 SGTT66
2 Comp SGTT22/2 SGTT32/2 SGTT33/2 SGTT42/2 SGTT43/2 SGTT44/2 SGTT62/2 SGTT63/2 SGTT64/2 SGTT66/2
3 Comp SGTT22/3 SGTT32/3 SGTT33/3 SGTT42/3 SGTT43/3 SGTT44/3 SGTT62/3 SGTT63/3 SGTT64/3 SGTT66/3

_______________________________________________________________________________________________

Horizontal/Vertical Tee

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SGTI22 SGTI32 SGTI33 SGTI42 SGTI43 SGTI44 SGTI62 SGTI63 SGTI64 SGTI66
2 Comp SGTI22/2 SGTI32/2 SGTI33/2 SGTI42/2 SGTI43/2 SGTI44/2 SGTI62/2 SGTI63/2 SGTI64/2 SGTI66/2
3 Comp SGTI22/3 SGTI32/3 SGTI33/3 SGTI42/3 SGTI43/3 SGTI44/3 SGTI62/3 SGTI63/3 SGTI64/3 SGTI66/3

_______________________________________________________________________________________________

Square Tee Top Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SSTT22 SSTT32 SSTT33 SSTT42 SSTT43 SSTT44 SSTT62 SSTT63 SSTT64 SSTT66
2 Comp SSTT22/2 SSTT32/2 SSTT33/2 SSTT42/2 SSTT43/2 SSTT44/2 SSTT62/2 SSTT63/2 SSTT64/2 SSTT66/2
3 Comp SSTT22/3 SSTT32/3 SSTT33/3 SSTT42/3 SSTT43/3 SSTT44/3 SSTT62/3 SSTT63/3 SSTT64/3 SSTT66/3

_______________________________________________________________________________________________

Square Tee Inside Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SSTI22 SSTI32 SSTI33 SSTI42 SSTI43 SSTI44 SSTI62 SSTI63 SSTI64 SSTI66
2 Comp SSTI22/2 SSTI32/2 SSTI33/2 SSTI42/2 SSTI43/2 SSTI44/2 SSTI62/2 SSTI63/2 SSTI64/2 SSTI66/2
3 Comp SSTI22/3 SSTI32/3 SSTI33/3 SSTI42/3 SSTI43/3 SSTI44/3 SSTI62/3 SSTI63/3 SSTI64/3 SSTI66/3

_______________________________________________________________________________________________

Square Tee Outside Lid

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SSTO22 SSTO32 SSTO33 SSTO42 SSTO43 SSTO44 SSTO62 SSTO63 SSTO64 SSTO66
2 Comp SSTO22/2 SSTO32/2 SSTO33/2 SSTO42/2 SSTO43/2 SSTO44/2 SSTO62/2 SSTO63/2 SSTO64/2 SSTO66/2
3 Comp SSTO22/3 SSTO32/3 SSTO33/3 SSTO42/3 SSTO44/3 SSTO44/3 SSTO62/3 SSTO63/3 SSTO64/3 SSTO66/3

_______________________________________________________________________________________________

Gusset Intersection

Note: A flyover is included in a compartment

 

 

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SINT22 SINT32 SINT33 SINT42 SINT43 SINT44 SINT62 SINT63 SINT64 SINT66
2 Comp SINT22/2 SINT32/2 SINT33/2 SINT42/2 SINT43/2 SINT44/2 SINT62/2 SINT63/2 SINT64/2 SINT66/2
3 Comp SINT22/3 SINT32/3 SINT33/3 SINT42/3 SINT43/3 SINT44/3 SINT62/3 SINT63/3 SINT64/3 SINT66/3

_______________________________________________________________________________________________

Blank End

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
All SBE22 SBE32 SBE33 SBE42 SBE43 SBE44 SBE62 SBE63 SBE64 SBE66

_______________________________________________________________________________________________

Flanged Plate

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
All SFP22 SFP32 SFP33 SFP42 SFP43 SFP44 SFP62 SFP63 SFP64 SFP66

_______________________________________________________________________________________________

Short Connector

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
All SSCC22 SSCC32 SSCC33 SSCC42 SSCC43 SSCC44 SSCC62 SSCC63 SSCC64 SSCC66

_______________________________________________________________________________________________

Cable Retaining Strap

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SCR22 SCR32 SCR33 SCR42 SCR43 SCR44 SCR62 SCR63 SCR64 SCR66
2 Comp SCR22/2 SCR32/2 SCR33/2 SCR42/2 SCR43/2 SCR44/2 SCR62/2 SCR63/2 SCR64/2 SCR66/2
3 Comp SCR22/3 SCR32/3 SCR33/3 SCR42/3 SCR43/3 SCR44/3 SCR62/3 SCR63/3 SCR64/3 SCR66/3

_______________________________________________________________________________________________

Pin Rack

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SPR22 SPR32 SPR33 SPR42 SPR43 SPR44 SPR62 SPR63 SPR64 SPR66
2 Comp SPR22/2 SPR32/2 SPR33/2 SPR42/2 SPR43/2 SPR44/2 SPR62/2 SPR63/2 SPR64/2 SPR66/2
3 Comp SPR22/3 SPR32/3 SPR33/3 SPR42/3 SPR43/3 SPR44/3 SPR62/3 SPR63/3 SPR64/3 SPR66/3

_______________________________________________________________________________________________

Fitting Coupler

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SFC22 SFC32 SFC33 SFC42 SFC43 SFC44 SFC62 SFC63 SFC64 SFC66
2 Comp SFC22/2 SFC32/2 SFC33/2 SFC42/2 SFC43/2 SFC44/2 SFC62/2 SFC63/2 SFC64/2 SFC66/2
3 Comp SFC22/3 SFC32/3 SFC33/3 SFC42/3 SFC43/3 SFC44/3 SFC62/3 SFC63/3 SFC64/3 SFC66/3

_______________________________________________________________________________________________

Bell Mouth

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SBM22 SBM32 SBM33 SBM42 SBM43 SBM44 SBM62 SBM63 SBM64 SBM66
2 Comp SBM22/2 SBM32/2 SBM33/2 SBM42/2 SBM43/2 SBM44/2 SBM62/2 SBM63/2 SBM64/2 SBM66/2
3 Comp SBM22/3 SBM32/3 SSBM33/3 SBM42/3 SBM43/3 SBM44/3 SBM62/3 SBM63/3 SBM64/3 SBM66/3

_______________________________________________________________________________________________

Reducer

In order to provide a full and correct part number, you will need to complete the reference with the size of the trunking that the reducer is required to meet; i.e. SFLR44-33 (100x100mm to 75x75mm Reducer) or SFLR44-33/2 (100x100mm 2C to 75x75mm 2C Reducer)

 

Size 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
1 Comp SFLR33/__ SFLR42/__ SFLR43/__ SFLR44/__ SFLR62/__ SFLR63/__ SFLR64/__ SFLR66/__
2 Comp SFLR33/__2 SFLR42/__2 SFLR43/__2 SFLR44/__2 SFLR62/__2 SFLR63/__2 SFLR64/__2 SFL66/__2
3 Comp SFLR33/__3 SFLR42/__3 SFLR43/__3 SFLR44/__3 SFLR62/__3 SFLR63/__3 SFLR64/__3 SFLR66/__3

_______________________________________________________________________________________________

Suspension Bracket

Size 50×50 75×50 75×75 100×50 100×75 100×100 150×50 150×75 150×100 150×150
All SSH22 SSH32 SSH33 SSH42 SSH43 SSH44 SSH62 SSH63 SSH64 SSH66

_______________________________________________________________________________________________

 

Comments are closed.