Cavity Fixings from Armafix

When fixing into plasterboard or cavity walls, it’s not always possible to fix into one of the members and that is where our full range of cavity fixings can help.  From speedplugs through to cavity anchors, here at Armafix we will have the right fixing for you. ________________________________________________________________________________________________


speed_plugThe speedplug is a metal self-drilling plasterboard fixing complete with a 38mm pan head screw and offers a maximum fixing thickness of 15mm. ________________________________________________________________________________________________

Speedplug – Nylon

speedplug_nylonThe nylon speedplug is a selft-drilling pasterboard fixing complete with a 35mm pan head screw and offers a maximum fixing thickness of 10mm. ________________________________________________________________________________________________

Spring Toggles – Cavity Fixings

spring_toggleThe spring toggle is ideal for securing fittings to plasterboard ceilings and other cavity situations.  We stock spring toggles to suit M3, M5, M6, M8 and M10 screws but please note that they are supplied without screws.  The hole you need to drill to push the spring toggle through needs to be between 2.5 and 3 times the screw diameter. ________________________________________________________________________________________________

Ramnut – Multi Purpose Fixing

ramnutThe ramut is a neoprene rubber sleeve which compresses when the screw is tightened.  It gives secure fixing in hollow materials, partial voids and solid masonry.   Please note that screws need to be ordered separately.  We stock a range from M6 x 25 up to M10 x 55.  You will need to drill a hole approximately twice the size of the thread size. ________________________________________________________________________________________________

Metal Cavity Anchor

metal_cavity_anchorThe metal cavity anchor is a cavity fixing for securing higher loads in plasterboard.  They can be expanded either with a setting tool or by screwing.  Metal cavity anchors are supplied with screws.  We stock a large range from M4 x 25, which can be used in a wall thickness of up to 5mm, right up to M6 x 70, which can be used in a wall thickness of up to 32mm.


Cavity Anchor Setting Tool

setting_toolThe setting tool is used for expanding metal cavity anchors prior to driving the screws and it suits all sizes.


Nail Anchors

nail_anchorsNail anchors are an all metal expansion fixing for masonry.  You simply drill a 6mm hole and then knock them in.  We stock, 6 x 30mm, 6 x 40mm, 6 x 50mm and 6 x 65mm.


If you can’t find the product you’re looking for, contact our friendly team today on 0113 256 7211.  We have had years of experience in solving the day-to-day challenges that you face and will be glad to help you.


Comments are closed.